Kabir Instruments & Technology

Description:

Most often, the floats and board level indicators find its application in over ground and overhead storage tanks

They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on

Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on

In short, the float and board level indicators are most widely used in all nonhazardous and nonpressurized tank

Features:

The features of a typical float and board level indicator can be detailed as follows.It has dust proof pulley housing. It comes with an SS bush bearing for a smooth rotation of pulley

The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting

It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking

The indicator of course, has a slack float with large diameter for higher accuracy

This level indicator is very easy to transport as well as install

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: Wooden Cages & Bubble Sheet

We are a trustworthy enterprise in this domain, devotedly committed towards offering a qualitative range of HCL Level Indicator that has box type guard made of steel channels, the indicator offered by us is precisely manufactured by our skilled workforce using leading technology in conformance with defined standards. We confirm our customers that the provided indicator is excellent on counts of quality.

Features:

• Simple operation
• Low maintenance
• High efficiency

Simple Operation:

When the liquid level rise in the tank, the liquid also rise inside the glass tube carrying a graduated Scale. The liquid level in the tank can be conveniently read against the scale

In-built Ruggedness:

Box type guard made of steel channels (Polypropylene for corrosive applications) Enhances safety in operation and long usability

Clear full visibility:

High quality Borosilicate glass tube

Details Required for Quotation:

Center to center distance

Material of construction

Connection detail

Operating pressure & temperature

Specification:

Glass Tube: Borosilicate

Glass OD: 16 mm, 19 mm, 22 mm

Material of All Wetted Parts: MS, SS304, SS316, SS316L, PP, PTFE

Gland Packing: PTFE

glass Protector: MS Powder Coated, SS, PP

Scale: Aluminum, SS, Acrylic, Bakelite

Mounting: Side, Rear, Bottom & Top

Rated Temp.: 150 C°

“KABIR” manufactures Tubular Level Indicator (Side Mounted) with Tie Rod design, with Scale OR without Scale, with OR without inbuilt Valves. It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc.

Features:

The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel

The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact

We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure

As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight

It is available in single length of 2000 mm C/C Distance. We can extend the length by coupling 2 or more through coupler

We are providing Air Vent Plug at top & drain plug at bottom for taking sample

We can also provide Inbuilt Isolation Valve on request

It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application

It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking

Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of ''C'' – Channel

Offset Constructed Isolation Valve on request

The connection provided will be Flanged / Screwed / TC Joint

Specifications:

Connection: Flanged Asa 150#/Asa 300#Packing: Teflon

Valve: C.S./S.S.304/S.S. 316/P.P./M.S.+ Ptfe/S.S.+Ptfe

Press Rating: Up to 12 Kg/Cm²Temp Rating: Up to 250 ºC

Range: Up to 3 Meters In Single Piece

Vacuum: Full

Additional Information:

• Item Code: TLI-108
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 1000 nos per month
• Delivery Time: within a Week
• Packaging Details: Export Worthy Packing

• The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel
• The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact
• We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure
• As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight.
• It is available in single length of 2000 mm C/C Distance
• We can extend the length by coupling 2 or more through coupler
• We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request
• It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application
• It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking
• Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of ''C'' – Channel
• Offset Constructed Isolation Valve on request
• The connection provided will be Flanged / Screwed / TC Joint

• Connection: Flanged ASA 150#/ASA 300#
• Protective Channel: M/C Bend Channel Box with Power Coated/ M.S/S.S.304/S.S 316/FRP/PVC
• Glass Tube: Heavy Walled Boshroate H-19/16
• Packing: Teflon
• Valve: CS./S.S.304/S.S. 316/P.P./M.S.+ PTFE/S.S.+PTFE
• Press Rating: Up to 12 kg/cm
• Temp Rating: Up to 250ºC

Additional Information:

• Item Code: TMLI-009
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet

• Clear visibility
• Powder coated screen printed scale board
• Less corrosion powder coated finish
• Easy movement nylon roller pointer glides effortlessly
• No guide wire specially designed self centering float/anchor plate optional
• Non- stretching multi strand wire rope in ss/pp
• Dust free housing for pulleys - minimizing friction in movement
• Easy to install, modular design
• Vapor tight-version for evaporating fluids

• Water, veg oil, molasses, caustics, brine, H2SO4 etc. Vapor sealed for solvent, HCL, and NH4OH etc

Additional Information:

• Item Code: BLI
• Production Capacity: 100
• Delivery Time: EX STOCK
• Packaging Details: EXPORT WORTHY PACKING

Details Required For Quotation:

• Height of the tank & height of the nozzle welded on it
• Name of the liquid
• Material of construction of wetted parts
• Specific gravity of the liquid
• Operating temperature
• Operating pressure
• Top nozzle detail on which you are intending to mount level indicator

Additional Information:

• Item Code: TMLI-108
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

Additional Information:

• Item Code: TLI
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100
• Delivery Time: WITHIN A WEEK
• Packaging Details: EXPORT WORTHY PACKING

Additional Information:

• Item Code: TLI-PP-001
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

• 2 probe moc: 30 kg/cm max
• Response time: < 6 va
• Temperature coefficient: < 1000 msec
• Process connections: Flame-proof, [p-65, iia, iib, cmri certified]
• Mounting: Flanged/threaded
• Operating conditions: Top of the tank
• Optional: Temperature 0 to 55°C/humidity 5 to 95% non condensing

Additional Information:

• Item Code: DLI-108
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

“Kabir” manufactures Acid Level Indicator (Side Mounted) with Tie Rod design, with Scale or without Scale, with OR without inbuilt Valves. It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc.

Features:

The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact

We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / cm² service pressure

As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight

It is available in single length of 2000 mm C/C Distance. We can extend the length by coupling 2 or more through coupler

We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request

It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application

It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking

Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of 'C' – Channel

Offset Constructed Isolation Valve on request

The connection provided will be Flanged / Screwed / TC Joint

Specifications:

Connection: Flanged Asa 150#/Asa 300#End Fitting: Cs/S.S.304/S.S 316/P.P

Protective Channel: M/C Bend Coated Box With Power Coated / M.S/S.S.304/S.S 316/Frp/Pvc

Glass Tube: Heavy Walled Borosilicate H-19/16Packing: Teflon

Valve: C.S./S.S.304/S.S. 316/P.P./M.S.+ Ptfe/S.S.+Ptfe

Press Rating: Up To 12 Kg/Cm²

Additional Information:

• Item Code: TLI-PP-002
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

Features:

The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel

The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact

We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure

As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight.It is available in single length of 2000 mm C/C Distance

We can extend the length by coupling 2 or more through coupler

We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request

It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application

It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking

Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of ''C'' – Channel

Offset Constructed Isolation Valve on request

The connection provided will be Flanged / Screwed / TC Joint

Specifications:

Connection: Flanged ASA 150#/ASA 300#End Fitting: CS/S.S.304/S.S 316/P.P

Protective Channel: M/C Bend Channel Box with Power Coated/ M.S/S.S.304/S.S 316/FRP/PVC

Packing: Teflon

Valve: CS./S.S.304/S.S. 316/P.P./M.S.+ PTFE/S.S.+PTFE

Press Rating: Up to 12 kg/cm2Temp Rating: Up to 250 ºC

Additional Information:

• Item Code: TLI-018
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week

KABIR make Magnetic Level Indicator provides clear, high clarity indication of liquid level. Typically, Magnetic Level Gauge consists of three major components: Float Chamber, Float and Indicator System. Magnetic Level Indicator is principally designed as an alternative to glass level gauges. We offer Magnetic Level Gauge having top-bottom, top and side mounted construction with two types of indicator system i.e. Capsule and Bi-colour Rollers. Magnetic level indicators are tailor made to various types of construction and sizes.

Additional Information:

• Item Code: TLI-00
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

Backed by a team of adroit professionals, we are manufacturing, exporting and supplying an extensive quality Side Mounted Magnetic Level Indicator that is widely used for measurement of water level and to control the water wastage. Precisely designed, provided indicator is engineered using quality tested components and innovative technology by our adept professionals. Further, our prestigious clients can avail this level indicator from us in several technical specifications at cost effective prices.

Features

• Available with controller
• Used for continuous measurement
• Ideal for colorless, corrosive or toxic liquid
• Adjustable alarm switches (Optional)
  

Other Details

• A Float of compatible MOC, carrying a magnet, is immersed in the liquid and moves due to buoyancy
• The movement is conditioned within a SS Float Chamber. External to the Float Chamber is a Glass Tube carrying a Magnetic Follower and an Indicating Assembly consisting of magnetic strips
• The magnet on the Float and the magnet on the Magnetic follower are coupled to move in unison
• When the Float moves along with change in liquid level, the Magnetic Follower moves in unison inside the Glass Tube and PVC magnetic strips thereby allowing clear visibility of level

Additional Information:

• Item Code: SMMLI_RD
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

• Broad range of chamber styles
• Fabricated non-magnetic chambers
• ANSI and din flanges
• Precision manufactured float
• Bi-color rotating roller type indicator
• Red & black capsule design type indicator
• Feed water heaters
• Industrial Boilers
• Oil water separators
• Flash drums
• Surge tanks
• Gas chillers
• Level switches
• Level transmitters with 4-20 ma output and digital indicator in mm or litter
• Stainless steel scale standard
• Customer scales

Additional Information:

• Item Code: SMLI-LT-108
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

Kabir manufactures high performance Magnetic Level Indicator. There are twelve basic configuration styles, including top mounted models. Kabir magnetic level indicators are produced in a wide range of materials of construction, including plastics. “Kabir” also offers one of the most complete selections of process connection types and sizes in the industry. It may be equipped with a variety of Level Transmitters and Switches, as well as, Flag & Shuttle indicators with or without stainless steel scales. This enables the “Kabir” to be a complete level and monitoring control. A change of level in the process tank corresponds to a similar change within the chamber. In response to the level movement, the float moves accordingly, actuating the Bi – Color Rotating Roller or Red & Black Capsule for visual indication.

Features:

Broad range of chamber styles

Fabricated non-magnetic chambers

Ansi and din flanges

Precision manufactured float

Bi – color rotating roller type indicator

Red & black capsule design type indicator

Feed water heaters

Industrial boilers

Oil water separators

Flash drums

Surge tanks

Gas chillers

Level switches

Stainless steel scale standard

Customer scales

Specifications:

Level transmitters: 4-20 ma output and digital indicator in mm or litter

Chamber design: 2”, 2.5", OR 3" chamber diameter according to the application

Additional Information:

• Item Code: SMLI-108
• Pay Mode Terms: Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: wooden cages & bubble sheet.

Description:

Drum Level Indicator is an easy & cost effective means to check level of fluid remaining in a drum / tank Face of the Indicator is fitted with a display marked from 0 to 210 litres which can be reversed to graduation in gallon from 0 to 55 gallons

Float has a Polyethylene construction which allows it to be used with a wide range of liquids including water , coolants etc. in addition to oils & fuels

Planetary gear mechanism float connected with a string moves down as the liquid level goes down in the drum.Float is partially filled with water & changing the amount of water allows for the same unit to be used with liquids of different viscosities

Additional Information:

• Item Code: SMLI
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

Kabir make:

Most often, the floats and board level indicators find its application in over ground and over head storage tanks

They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on

Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on

In short, the float and board level indicators are most widely used in all non hazardous and non pressurized tank

Features:

The features of a typical float and board level indicator can be detailed as follows.It has dust proof pulley housing. It comes with an SS bush bearing for a smooth rotation of pulley

The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting

It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking

The indicator of course, has a slack float with large diameter for higher accuracy

This level indicator is very easy to transport as well as install

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: Wooden Cages & Bubble sheet.

Kabir make:

The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel

The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact

We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure

As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight

It is available in single length of 2000 mm C/C Distance

We can extend the length by coupling 2 or more through coupler

We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request

It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application

It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking

Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of ''C'' – Channel

Offset Constructed Isolation Valve on request

The connection provided will be Flanged / Screwed / TC Joint

Specifications:

Connection: Flanged ASA 150#/ASA 300#Protective Channel: M/C Bend Channel Box With Power Coated/ M.S/S.S.304/S.S 316/FRP/PVC

Glass Tube: Heavy Walled Borosilicate H-19/16Packing: Telfone

Valve: C.S./S.S.304/S.S. 316/P.P./M.S.+ PTFE/S.S.+PTFE

Press Rating: Upto 12 Kg/Cm²Vacuum: Full

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

Additional Information:

• Delivery Time: ex stock
• Packaging Details: Export worthy packing

Additional Information:

• Delivery Time: ex stocl
• Packaging Details: Export worthy packing

Features:

The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel

The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact

We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure

As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight.It is available in single length of 2000 mm C/C Distance

We can extend the length by coupling 2 or more through coupler

We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request

It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application

It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking

Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of ''C'' – Channel

Offset Constructed Isolation Valve on request

The connection provided will be Flanged / Screwed / TC Joint

Specifications:

• Connection: Flanged ASA 150#/ASA 300#End Fitting: CS/S.S.304/S.S 316/P.P
• Protective Channel: M/C Bend Channel Box with Power Coated/ M.S/S.S.304/S.S 316/FRP/PVC
• Glass Tube: Heavy Walled Boshroate H-19/16Packing: Teflon
• Valve: CS./S.S.304/S.S. 316/P.P./M.S.+ PTFE/S.S.+PTFE
  
• Temp Rating: Upto 250 ºC

Additional Information:

• Item Code: SMLI-LT_108
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

Side Mounted Model No. FEMLS - 100:

• Height of the tank & height of the nozzle welded on it
• Name of the liquid
• Material of construction of wetted parts
• Specific gravity of the liquid
• Operating temperature
• Operating pressure
• Top nozzle detail on which you are intending to mount level indicator

Additional Information:

• Item Code: SMLI-SS-108
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

• Most often, the floats and board level indicators find its application in over ground and over head storage tanks
• They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on
• Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on
• In short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks Features:
• The features of a typical float and board level indicator can be detailed as follows.
• It has dust proof pulley housing. It comes with an SS bush bearing for a smooth rotation of pulley
• The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting
• It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking
• The indicator of course, has a slack float with large diameter for higher accuracy
• This level indicator is very easy to transport as well as install

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: Wooden Cages & Bubble sheet.

We are Manufacturer of excellent quality Side Mounted Magnetic Level Switch which caters diverse requirements of engineering industries. Provided level switch is widely used for sensing level limit in very low density fluids to high level density fluids. In addition to this, our quality experts stringently check this level switch on various quality parameters to ensure its accurate performance. Our clients can avail this level switch from us at market-leading prices.

Features

• Nozzle size on which you are intending to mount the switch
• Material of construction of wetted parts
• Service
• Specific gravity
• Operating pressure
• Operating temperature
• Flange details Housing enclosure (Flame proof/weather proof)
  

• High/low level alarm
• Automatic pump/valve control
• Elimination of tank over flow
• Enhances pump safety against dry running

Additional Information:

• Item Code: SMLS-108
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages

“KABIR” offers Reflex Level Gauge for the Measurement of liquid level at a glance in tank. This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks. These gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the Interior of the gauge. So that the area appears dark (Black). While the light strikes the open space, above the liquid level is reflected back to the observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems.

In this type of level gauge the liquid level is discriminated in the form of different

SPECIFICATIONS :

Type                           : Reflex / Transparent

Visibility                : Full Visibility / Partial Visibility

Liquid Chamber       : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P

Cover Plate               : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P

Gasket                   : CAF , PTFE , Graphoil , Non Asbestose Other On request

Glass                          : Borosilicate Toughened of Indigenous – Temperature Range upto

·                                       150^oC , Klinger / Illamdur Make Imported Temperature Range Upto 350^oC AND     

·                                        PRESSURE UP TO 100 BAR  AND Other on request.

Additional Information:

• Item Code: KIT-rlg-108
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 10
• Delivery Time: EX STOCK
• Packaging Details: EXPORT WORTHY PACKING

• The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel
• The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact
• We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure
• As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight.
• It is available in single length of 2000 mm C/C Distance
• We can extend the length by coupling 2 or more through coupler
• We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request
• It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application
• It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking
• Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of ''C'' – Channel
• Offset Constructed Isolation Valve on request
• The connection provided will be Flanged / Screwed / TC Joint

• Connection: Flanged ASA 150#/ASA 300#
• End Fitting: CS/S.S.304/S.S 316/P.P
• Protective Channel: M/C Bend Channel Box with Power Coated/ M.S/S.S.304/S.S 316/FRP/PVC
• Glass Tube: Heavy Walled Boshroate H-19/16
• Packing: Teflon
• Valve: CS./S.S.304/S.S. 316/P.P./M.S.+ PTFE/S.S.+PTFE
• Press Rating: Up to 12 kg/cm2

Additional Information:

• Item Code: TMLI-WV-009
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

KABIR MAKE exporting an extensive quality Side Mounted Magnetic Level Indicator that is widely used for measurement of water level and to control the water wastage. Precisely designed, provided indicator is engineered using quality tested components and innovative technology by our adept professionals. Further, our prestigious clients can avail this level indicator from us in several technical specifications at cost effective prices.

Working Principles:

A Float of compatible MOC, carrying a magnet, is immersed in the liquid and moves due to buoyancy The movement is conditioned within a SS Float Chamber. External to the Float Chamber is a Glass Tube carrying a Magnetic Follower and an Indicating Assembly consisting of magnetic strips The magnet on the Float and the magnet on the Magnetic follower are coupled to move in unison When the Float moves along with change in liquid level, the Magnetic Follower moves in unison inside the Glass Tube and PVC magnetic strips thereby allowing clear visibility of level

Features:

• Available with controller, Level Transmitter Used for continuous measurement
  
• Ideal for colorless, corrosive or toxic liquid
• Adjustable alarm switches (Optional)

• Available with controller
• Used for continuous measurement
• Ideal for colorless, corrosive or toxic liquid
• Adjustable alarm switches (Optional)

Other Details:

• A Float of compatible MOC, carrying a magnet, is immersed in the liquid and moves due to buoyancy
• The movement is conditioned within a SS Float Chamber
• External to the Float Chamber is a Glass Tube carrying a Magnetic Follower and an Indicating Assembly consisting of magnetic strips
• The magnet on the Float and the magnet on the Magnetic follower are coupled to move in unison
• When the Float moves along with change in liquid level, the Magnetic Follower moves in unison inside the Glass Tube and PVC magnetic strips thereby allowing clear visibility of level

Application:

Most often, the floats and board level indicators find its application in over ground and over head storage tanks

They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on

Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on

In short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks

Features:

The features of a typical float and board level indicator can be detailed as follows.It has dust proof pulley housing. It comes with an SS bush bearing for a smooth rotation of pulley

The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting

It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking

The indicator of course, has a slack float with large diameter for higher accuracy

This level indicator is very easy to transport as well as install

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: WOODEN CAGES & BUBBLE SHEET.

The float is attached to a Level Measuring Indicator, which passes through 2 nos. frictionless specially designed pulleys. The Pulleys, in turn, are connected to a pointer, which moves on a graduated scale by the side of the tank.

Features:

• Clear visibility
• Powder coated screen printed scale board
• Less corrosion powder coated finish
• Easy movement nylon roller pointer glides effortlessly
• No guidewire specially designed self-centring float/Anchor plate optional
• Non- stretching multi strand wire rope in SS/PP
• Dust free housing for pulleys - minimizing friction in movement
• Easy to install, modular design
• Vapour tight-version for evaporating fluids

Applications:

Water, Veg oil, LSHS, Molasses, Caustics, Brine, H2SO4 etc. Vapour sealed for Solvent, Hcl, and NH40H etc

Additional Information:

• Item Code: FBLI-108
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: Wooden Cages & Bubble sheet.

Description:

The pharmaceutical and petrochemical industry needs the most advanced mechanisms for the success of their operations

This is because they deal with materials that are highly toxic and inflammable, and are used under high pressures and temperatures

The Reflex & Transparent Level Gauge is one mechanism that is extremely suitable for this industry

Reflex & transparent level gauges are preferred due to their ruggedness, sturdiness and low initial costs

They are installed to give easy level reading by viewing the position of liquid through tough glass panes

KABIR MAKE exporting an extensive quality Level Indicator with Transmitter that is widely used for measurement of water level and to control the water wastage. Precisely designed, provided indicator is engineered using quality tested components and innovative technology by our adept professionals. Further, our prestigious clients can avail this level indicator from us in several technical specifications at cost effective prices.

Features:

Available with controller

Used for continuous measurement

Ideal for colorless, corrosive or toxic liquid

Adjustable alarm switches (Optional)

Working Principles:

A Float of compatible MOC, carrying a magnet, is immersed in the liquid and moves due to buoyancy

The movement is conditioned within a SS Float Chamber. External to the Float Chamber is a Glass Tube carrying a Magnetic Follower and an Indicating Assembly consisting of magnetic strips

The magnet on the Float and the magnet on the Magnetic follower are coupled to move in unison

When the Float moves along with change in liquid level, the Magnetic Follower moves in unison inside the Glass Tube and PVC magnetic strips thereby allowing clear visibility of level

Features:

The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel

The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact

We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure

As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight.It is available in single length of 2000 mm C/C Distance

We can extend the length by coupling 2 or more through coupler

We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request

It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application

It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking

Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of ''''C'''' – Channel

Offset Constructed Isolation Valve on request

The connection provided will be Flanged / Screwed / TC Joint

Specifications:

Connection: Flanged ASA 150#/ASA 300#End Fitting: CS/S.S.304/S.S 316/P.P

Protective Channel: M/C Bend Channel Box with Power Coated/ M.S/S.S.304/S.S 316/FRP/PVC

Press Rating: Upto 12 kg/cm

Temp Rating: Upto 250 ºC

Range: Upto 3 METERS IN SINGLE PIECE

Vaccum: Full

Additional Information:

• Item Code: TMLT_DD
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

• Used for precision measurement of pressure and differential pressure
• Adjustable scale for zero
• Flass tube/Acrylic Body
• Wall mounted / Stand mounted

• Used for precision measurement of pressure and differential-pressure

• Most often, the floats and board level indicators find its application in over ground and over head storage tanks
• They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on
• Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on
• In short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks

• The features of a typical float and board level indicator can be detailed as follows.
• It has dust proof pulley housing. It comes with an SS bush bearing for a smooth rotation of pulley
• The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting
• It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking
• The indicator of course, has a slack float with large diameter for higher accuracy
• This level indicator is very easy to transport as well as install

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: Wooden Cages & Bubble Sheet.

Features:The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel

The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact

We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure

As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight.It is available in single length of 2000 mm C/C Distance

We can extend the length by coupling 2 or more through coupler

We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request

It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application

It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking

Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of ''C'' – Channel

Offset Constructed Isolation Valve on request

The connection provided will be Flanged / Screwed / TC Joint

Specifications:

Connection: Flanged ASA 150#/ASA 300#End Fitting: CS/S.S.304/S.S 316/P.P

Protective Channel: M/C Bend Channel Box with Power Coated/ M.S/S.S.304/S.S 316/FRP/PVC

Glass Tube: Heavy Walled Boshroate H-19/16Valve: CS./S.S.304/S.S. 316/P.P./M.S.+ PTFE/S.S.+PTFE

Press Rating: Up to 12 KG/CM²Temp Rating: Up to 250 ºC

Additional Information:

• Item Code: SMLI-PP-108
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

• The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel
• The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact
• We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm² service pressure
• As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight.
• It is available in single length of 2000 mm C/C Distance
• We can extend the length by coupling 2 or more through coupler
• We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request
• It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application
• It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking
• Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of ''C'' – Channel
• Offset Constructed Isolation Valve on request
• The connection provided will be Flanged / Screwed / TC Joint

• Connection: Flanged ASA 150#/ASA 300#
• End Fitting: CS/S.S.304/S.S 316/P.P
• Protective Channel: M/C Bend Channel Box with Power Coated/ M.S/S.S.304/S.S 316/FRP/PVC
• Glass Tube: Heavy Walled Boshroate H-19/16
• Temp Rating: Up to 250 ºC
• Range: Up to 3 m
• Vacuum: Full

Additional Information:

• Item Code: TLI-WV-018
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.