Kabir Instruments & Technology

KABIR” Make L Type Indicators are defect-free oil level indicators that have a transparent body. Oil level indicators offered by us are procured from reliable manufacturers of the industry, which help in overcoming the limitations of monitoring oil level within gearbox with dip stick/oil sight window. Further, transparent body indicators facilitate clear on-line indication of oil level in gear boxes.

Additional Information:

• Item Code: OLG-09
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cage & Bubble sheet.

IBR Level Gauge to our experience and skills in this sector, we have been successfully engaged in manufacturing & supplying Reflex Level Indicator. These level indicators are tested by our quality analyst to ensure their high strength, sturdiness and rust resistant surface. Our offered range of level indicators find wide application in petrochemical industry, power plants and pharmaceutical industries. Reflex Level Indicator is manufactured in compliance with the set standards & norms of the industry.

Further Details:

Reflex gauges give an accurate reading of liquid levels. Colourless liquids can be seen using the principles of light refraction and refraction through the special prism glass

Light striking the area of glass covered by the liquid is allowed to pass to the interior of the gauge - this area appears black

Light striking the area of glass above the liquid is reflected black silver. The distinct line that separates the black and silver areas shows the actual liquid level in the system

Positioning:

These gauges are connected on the side of vessels, have liquid chamber made of single piece metallic bar stock. Clear visibility of the path of the liquid in the chamber is provided by clamping & Sealing firmly on the chamber heavy duty toughened glasses

Accessories: Isolation valve, drain valve, vent valve -steam jacket arrangement

Option: IBR Approved available on request Application is widespread in Petrochemical, Power, Fertilizer, and Pharmaceutical chemical Industries.Application: Boiler, Ammonia Receiver, solvent etc

Transparent Level Indicator:

Transparent gauges give an accurate reading of liquid level, clear glass is mounted on the front and back of the gauge. The permits the observer to see not only the level of the liquid, but also its characteristics such as colour or the interface between two immiscible liquids in the same system

Additional Information:

• Item Code: FBLI-108-2
• Production Capacity: 100
• Delivery Time: EX STOCK
• Packaging Details: EXPORT WORTHY PACKING

We are an eminent firm occupied in manufacturing, exporting and supplying an extensive range of Board Level Gauge. This level gauge is used for fluid level measurements in several industries. This level gauge is available to us in several sizes and other such specifications to choose from. In order to ensure perfection in this level gauge, our quality controllers test them on numerous parameters.

Other Details:

Float and board level indicators are used for fluid level measurements in several industries

The float that is contained within a magnetic level indicator is, of course, the most important element of the instrument

In fact, its structural design, volume displacement, weight, and buoyancy force are all taken into careful consideration when a float is specified for a particular application

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: Wooden Cages & bubble sheet.

By keeping track of the latest market developments, we are offering an assorted collection of Float & Board Level Gauge. This gauge is attached to a multi strand wire rope & totally dusts free housing for pulleys. We ensure our customers that our gauge is quality tested on predefined parameters. Additionally, this gauge is provided at highly competitive price.

Features:

• Powder coated screen printed scale board
• Clear visibility
• Compact designs

Other Details:

• Clear visibility
• Powder coated screen printed scale board
• Less corrosion powder coated finish
• Easy movement nylon roller pointer glides effortlessly
• No guide wire specially designed self centering float/Anchor plate optional
• Non- stretching multi strand wire rope in SS/PP
• Dust free housing for pulleys - minimizing friction in movement
• Easy to install, modular design
• Vapor tight-version for evaporating fluids

Applications:

Water, Veg oil, LSHS, Molasses, Caustics, Brine, H2SO4 etc. Vapor sealed for Solvent, Hcl, and NH4OH etc

Additional Information:

• Item Code: FBLG

The Float & Board Level Gauge is attached to a multi strand wire rope, which passes through 2 nos. friction less specially designed pulleys.The Pulleys in turn are connected to a pointer, which moves on a graduated scale by the side of the tank.

Features:

Clear visibility

Powder coated screen printed scale board

Less corrosion powder coated finish

Easy movement nylon roller pointer glides effortlessly

No guide wire specially designed self centering float/ Anchor plate optional

Non- stretching multistrand wire rope in SS/PP

Dust free housing for pulleys - minimizing friction in movement

Easy to install, modular design,Vapour tight-version for evaporating fluid

Applications:

Water, Veg oil, LSHS, Molasses, Caustics, Brine, H2SO4 etc. Vapour sealed for Solvent, Hcl, and NH40H etc

“KABIR” Make L Type Indicators are defect-free oil level indicators that have a transparent body. Oil level indicators offered by us are procured from reliable manufacturers of the industry, which help in overcoming the limitations of monitoring oil level within gearbox with dip stick/oil sight window. Further, transparent body indicators facilitate clear on-line indication of oil level in gear boxes.

Specifications:

•          Available in BRASS,M.S., S.S. and M.S. with chrome plating
•          Dimensionally accurate
•          Corrosion & abrasion resistance
•          Length up to 80 MM  to 1000 MM OR as per Customize
•          With temp Indicator
•          L SHAPE , SQUARE TYPE, KNOBE TYPE  OIL LEVEL GAUGE

Additional Information:

• Item Code: SMLI-1008
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

With the help of our skilled and experienced professionals, we are recognized as one of the most prominent manufacturers & exporters of Float Board Level Gauge. These indicators are known for their features such as optimum quality, easy installation and accuracy. Our offered range of level indicators can be availed at nominal prices in the market. Float Board Level Indicator is used for measuring water, vegetable oil, molasses, caustic solutions and brines.

Further Details:

• As the liquid level rises, a large dia float moves up with the change in liquid level in the tank.
  The float is attached to a multistrand wire rope, which passes through 2 nos. friction Less specially designed Pulleys. The Pulleys in turn are connected to a pointer, which moves on a graduated scale by the side of the tank.

Features:

• Clear visibility
• Powder coated screen printed scale board
• Less corissosion powder coated finish
• Easy movement nylon roller pointer glides effortlessly
• No guide wire specially designed self centering float/ Anchor plate optional
• Non- stretching multistrand wire rope in SS/PP
• Dust free housing for pulleys - minimizing friction in movement
• Easy to install, modular design,
• Vapour tight-version for evaporating fluids.

Applications:

• Water, Veg oil, LSHS, Molasses, Caustics, Brine, H2SO4 etc. Vapour sealed for Solvent, Hcl, and NH40H etc.

Other Details:

Top Mounted Model No. FEMLT- 200:

Height Of The Tank & Height Of The Nozzle Welded On It

Name Of The Liquid

Material Of Construction Of Wetted Parts

Specific Gravity Of The Liquid

Operating Temperature

Operating Pressure

Top Nozzle Detail On Which You Are Intending To Mount Level Indicator

Side Mounted Model No. FEMLS - 100:

Center to Center Distance

Service/Name Of The Liquid

Material Of Construction Wetted Parts

Connection Detail

Specific Gravity Of The Liquid

Operating Temperature

Operating Pressure

Additional Information:

• Item Code: FEMLT-200
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

Application:

Most often, the floats and board level indicators find its application in over ground and over head storage tanksThey are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so onAlso, it is used in storage of vegetable oils, molasses, silicates, glucose and so onIn short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks

Features:

The features of a typical float and board level indicator can be detailed as follows.It has dust proof pulley housing. It comes with an SS bush bearing for a smooth rotation of pulleyThe pointer cradle has 6 nylon rollers and adjustable brackets for easy mountingIt has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color markingThe indicator of course, has a slack float with large diameter for higher accuracyThis level indicator is very easy to transport as well as install

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: Wooden Cages & Bubble sheet.

Our expertise we manufacturing, exporting and supplying a huge range of Magnetic Level Indicator which is used to measure the level of fluids. Fabricated using superior quality basic material by employing advanced machinery and sophisticated tools, these products compiled to the defined parameters of the industry in an efficient manner. These magnetic level indicators are mainly used in the hazardous pressurized vessels. Therefore, customers can avail these offered products from us in multifarious sizes and specifications as per their requirement.

Working Principles:

A float of compatible moc, carrying a magnet, is immersed in the liquid and moves due to buoyancy

The movement is conditioned within a ss float chamber. external to the float chamber is a glass tube carrying a magnetic follower and an Indicating assembly consisting of magnetic strips

The magnet on the float and the magnet on the magnetic follower are coupled to move in unison

When the float moves along with change in liquid level, the magnetic follower moves in unison inside the glass tube and pvc magnetic strips thereby allowing clear visibility of level

Features:

Available with controller

Used for continuous measurement

Ideal for colorless, corrosive or toxic liquid

Adjustable alarm switches (Optional)

Additional Information:

• Item Code: FBLI-108-1.0
• Production Capacity: 100
• Delivery Time: EX STOCK
• Packaging Details: EXPORT WORTHY PACKING OR CORRUGATED BOX

KABIR make Magnetic Level Indicator provides clear, high clarity indication of liquid level. Magnetic Level Indicator are principally designed as an alternative to glass level gauges. FILPRO offers Magnetic Level Indicator in top-bottom, top and side mounted construction with two types of indicator system i.e. Capsule and Bicolour Rollers. Magnetic Level Indicator is consists of three major components: Float Chamber, Float and Indicator System. Magnetic Level Indicator operates on the principle of magnetic field coupling to provide fluid level information. Float chamber is typically constructed with non magnetic pipe having process connections that matches to the vessel connections. Float size and weight is determined by the process fluid, pressure, temperature and the specific gravity of the process fluid. Float contains magnets to o provide 360 magnetic flux field.

KABIR make top Mounted Magnetic Level Indicator substitute to the dip sticks method (for Horizontal & Vertical Tanks.) Corrosive acids like Sulphuric, Nitric, Chlorosulphuric, Acetic Acids, Solvents like Benzene, Acetone, Toluene, OR any Organic Liquids like Butadine, Vinyl chloride. NO maintenance and NO power required. Simple non magnetic pipe with flange allows a magnet connected to the float move up and down inside the tube. An external bi-colour roller channel or float capsule indicates the level based on magnet position.

Roller Design : Indicator system is consists of bi-colour rollers equipped with magnets mounted on rail inside the housing. As the level starts rising or falling magnetic float also travels with liquid level in non magnetic chamber. The magnetic o interaction between magnets in float and bi-colour rollers causes each roller to rotate 180 . For applications where High and Low Level electrical signals are required, we offer adjustable limit switch assemblies.

Additional Information:

• Item Code: SMMLI
• Production Capacity: 100
• Delivery Time: EX STOCK
• Packaging Details: EXPORT WORTHY PACKING

KABIR make Magnetic Level Indicator provides clear, high clarity indication of liquid level. Magnetic Level Indicator are principally designed as an alternative to glass level gauges. FILPRO offers Magnetic Level Indicator in top-bottom, top and side mounted construction with two types of indicator system i.e. Capsule and Bicolour Rollers. Magnetic Level Indicator is consists of three major components: Float Chamber, Float and Indicator System. Magnetic Level Indicator operates on the principle of magnetic field coupling to provide fluid level information. Float chamber is typically constructed with non magnetic pipe having process connections that matches to the vessel connections. Float size and weight is determined by the process fluid, pressure, temperature and the specific gravity of the process fluid. Float contains magnets to o provide 360 magnetic flux field.

KABIR make top Mounted Magnetic Level Indicator substitute to the dip sticks method (for Horizontal & Vertical Tanks.) Corrosive acids like Sulphuric, Nitric, Chlorosulphuric, Acetic Acids, Solvents like Benzene, Acetone, Toluene, OR any Organic Liquids like Butadine, Vinyl chloride. NO maintenance and NO power required. Simple non magnetic pipe with flange allows a magnet connected to the float move up and down inside the tube. An external bi-colour roller channel or float capsule indicates the level based on magnet position.

Roller Design : Indicator system is consists of bi-colour rollers equipped with magnets mounted on rail inside the housing. As the level starts rising or falling magnetic float also travels with liquid level in non magnetic chamber. The magnetic o interaction between magnets in float and bi-colour rollers causes each roller to rotate 180 . For applications where High and Low Level electrical signals are required, we offer adjustable limit switch assemblies.

Capsule Design : Indicator system consists of bi-colour capsule which moves in glass tube inside the housing. As the level stars rising or falling magnetic float also travels with liquid level in non magnetic chamber. The magnetic interaction between magnets in float and capsule causes capsule to travel along with magnetic float. For applications where High and Low Level electrical signals are required, we offer adjustable limit switch assemblies. 

Performance

Reliable for aggressive, combustible, toxic, high pressure and high temperature (up to 150 C) liquid storage tanks. · Side mounted magnetic level indicator most reliable & safe for dangerous application like LPG, Oleume, Chlorosulphuric Acid, HNO2, Solvents like benzene, Toluene alcohols. · Useful for Acid, Alkali, Solvent, Oils, Vegetable Oil.

Additional Information:

• Item Code: FBLI-108-7
• Production Capacity: 100
• Delivery Time: EX STOCK
• Packaging Details: EXPORT WORTHY PACKING

• C/C Distance: To Mention
• Visible length/ No. of section: To Mention
• Service: To Mention
• Op. pressure kg/Cm2g/temp. C/ Sp Gr: To Mention
• Hydro test Pressure Kg/Cm2g: 1.5 times of Max Pressure
• Process Conn. Flange size & rating: To Mention
• Process Conn. Flange Material: To Mention
• Material of Construction: Toughened Borosilicate Imported Kinger/Maxos/Indian make
• Material of Construction: CS/SS 304/SS 316/PP/PTFE
• Material of Cover Plate: CS to ASTM A-105 (Non whetted parts)Valve Type/Design: Ball Check / Auto Shut -Off
• Valve Body Material: CS/SS 304/SS 316/PP/PTFE
• Valve Trim Material: SS 316Vent/Drain connection: 1/2" NPT (F) with Plug (OR) To Mention
• Material of bolts & nuts: SS 316 MS, EN-8, SS or to mention
• Gaskets/seals: CAF, AF 120, PTFE
• Line are engraved @ each 10 mm
• Scale: Aluminum/Acrylic/SS Linear marking
• Least count: 1 mm, 5 mm & 10 mm or to Mention

• Measuring Range	300 mm
  Size	1/2"
  Bolts Nuts	Ss316
  Glass	Reflex
  Accessories	With valve
  Pressure Rating	25 kg
  Process Connection Of M O C	Ss316
  Model	Rlg
  Brand	Kabir
  Mounting	Side - Side/Top -Bottom
  Type	Reflex
  Minimum Order Quantity	1 Piece

Additional Information:

• Item Code: RLG-09
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

We are counted amongst renowned manufacturers & exporters of Tubular Level Indicator. The gauge is mounted parallel to tank so as to form a closed loop causing tank liquid to seek its level in the gauge. Guards are provided in the form of tie-rods / c-channels around the gauge to protect it from accidental blows. End blocks have to build isolating valve, drain valve&vent plug.

Specifications:

Gland Packing: PTFE

Glass Protector: MS Powder Coated, SS, PP

Scale: Aluminium, SS, Acrylic, Beckilite

Mounting: Side, Rear, Bottom & Top

Rated Temp: 150° C

Rated Pressure: 10 kg/cm²Vent & Drain: Plug, Valve

Connection: Flanged, Screw

Details Required for Quotation:

Center to center distance

Material of construction

Connection detail

Operating pressure & temperature

We offer the high quality of Float Level Indicator Gauge.

KABIR make level gauge

Most often, the floats and board level indicators find its application in over ground and over head storage tanks

They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on

Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so onIn short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks

Features:

The features of a typical float and board level indicator can be detailed as follows.It has dust proof pulley housing. It comes with an SS bush bearing for a smooth rotation of pulley

The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting

It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking

The indicator of course, has a slack float with large diameter for higher accuracy

This level indicator is very easy to transport as well as install

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: Wooden Cages

Application:

Most often, the floats and board level indicators find its application in over ground and over head storage tanks

They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on

Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so onIn short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks

Features:

The features of a typical float and board level indicator can be detailed as follows.It has dust proof pulley housing. It comes with an SS bush bearing for a smooth rotation of pulley

The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting

It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking

The indicator of course, has a slack float with large diameter for higher accuracy

This level indicator is very easy to transport as well as install

KABIR make Magnetic Level Indicator provides clear, high clarity indication of liquid level. Magnetic Level Indicator are principally designed as an alternative to glass level gauges. FILPRO offers Magnetic Level Indicator in top-bottom, top and side mounted construction with two types of indicator system i.e. Capsule and Bicolour Rollers. Magnetic Level Indicator is consists of three major components: Float Chamber, Float and Indicator System. Magnetic Level Indicator operates on the principle of magnetic field coupling to provide fluid level information. Float chamber is typically constructed with non magnetic pipe having process connections that matches to the vessel connections. Float size and weight is determined by the process fluid, pressure, temperature and the specific gravity of the process fluid. Float contains magnets to o provide 360 magnetic flux field.

KABIR make top Mounted Magnetic Level Indicator substitute to the dip sticks method (for Horizontal & Vertical Tanks.) Corrosive acids like Sulphuric, Nitric, Chlorosulphuric, Acetic Acids, Solvents like Benzene, Acetone, Toluene, OR any Organic Liquids like Butadine, Vinyl chloride. NO maintenance and NO power required. Simple non magnetic pipe with flange allows a magnet connected to the float move up and down inside the tube. An external bi-colour roller channel or float capsule indicates the level based on magnet position.

Roller Design : Indicator system is consists of bi-colour rollers equipped with magnets mounted on rail inside the housing. As the level starts rising or falling magnetic float also travels with liquid level in non magnetic chamber. The magnetic o interaction between magnets in float and bi-colour rollers causes each roller to rotate 180 . For applications where High and Low Level electrical signals are required, we offer adjustable limit switch assemblies.

Capsule Design : Indicator system consists of bi-colour capsule which moves in glass tube inside the housing. As the level stars rising or falling magnetic float also travels with liquid level in non magnetic chamber. The magnetic interaction between magnets in float and capsule causes capsule to travel along with magnetic float. For applications where High and Low Level electrical signals are required, we offer adjustable limit switch assemblies. 

Performance

Reliable for aggressive, combustible, toxic, high pressure and high temperature (up to 150 C) liquid storage tanks. · Side mounted magnetic level indicator most reliable & safe for dangerous application like LPG, Oleume, Chlorosulphuric Acid, HNO2, Solvents like benzene, Toluene alcohols. · Useful for Acid, Alkali, Solvent, Oils, Vegetable Oil.

Additional Information:

• Item Code: SMM-LS
• Production Capacity: 100
• Delivery Time: WEEK
• Packaging Details: EXPORT WORTHY PACKING

KABIR Make the wide range of Reflex & Transparent Type Level Gauges. Specially designed to meet most critical requirements of petrochemical, fertilizer, pharmaceutical & chemical industries involving inflammable toxic, high pressure, high-temperature liquids, these products are highly demanded in the market. Our range comes have MOC of the valve such as SS 316, SS 304, CS, MS, PP & PTFE, TFE, PFA coated for the corrosive application.

Specification:

Gaskets: CAF/Metallic graphite/ pyrex/klinger

Isolation valve: In built straight/off set

Vent & drain: Plug/valve

Max. op. temp: 120° C to 400° C

Max. op pressure: 80 Kg/cm²Connection: Flanged/screwed

Body & cover plate: SS 316/SS 304/C S/MS, PP & PTFE/TFE/PFA coated for corrosive application

Valve/body trim: SS 316/SS 304/C S, MS, PP & PTFE/TFE/PFA coated for corrosive application

Mounting: Side/vertical/RHS/LHS

Vent and drain: Plug/valve

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: WOODEN CAGES & BUBBLE SHEET.

Additional Information:

• Item Code: FLI
• Production Capacity: 100
• Delivery Time: EX
• Packaging Details: EXPORT WORTHY PACKING

The goodwill we have gained in the market is due to offering high quality range of Transparent Level Gauge Indicator. Our offered gauge indicator is manufactured from the modernize technology and superior quality raw material. The entire range of gauge indicator is used in chemical, petrochemical industry & pharmaceutical industries. Besides, we offer the gauge indicator in a wide range of stipulations as per the needs of our customers.

Features:

Longer service life

Maintenance free

Rugged design

Other Details:

In this type of level gauge the liquid level is discriminated in the form of different brightness of the light on the reflex glasses

This is based on refractive indices of liquid and gas or vapor phase

In the liquid phase light is refracted to the glass and absorbed inside the gauge whereas in vapor phase light is reflected against the glass grooves and it appears very bright

This type of gauge is mainly recommended for colourless liquid

The gauge consists of a body machined to have an internal chamber and one or more front windows only on one side of the gauge as shown in figure

On each window a special high resistance plate reflex level glass is fitted with sealing joint and metal covers seized by ''''U'''' Bolts and Nuts

Specifications:

TypeReflex / Transparent

Visibility Full Visibility / Partial Visibility

Liquid Chamber

Carbon Steel, SS 304, SS 304L, SS 316, SS 316L, Monel,

Titanium, Inconel 600, Hastelloy C, PP, others on request

Cover Plate

Carbon Steel, SS 304, SS 304L, SS 316, SS 316L, Monel, Titanium,

Inconel 600, Hastelloy C, PP, others on request

Cushion CAF, PTFE, others on request

GasketCAF, PTFE, Graphoil, others on request

Toughened Borosilicate

Indigenous - Temperature Range upto 125 C

GlassKlinger / Illmadur make or equivalent - Temperature Range upto 320 °C as per DIN 7080/7081, BS 3463,

Ö-Norm M7353/7354, JIS B 8211, MIL-G-16356DFastenersSS, ASTM A 193 Gr. B7 / A 194 Gr. 2HIsolation Valves

Screwed OR Bolted Bonnet Offset Isolation Valves with Auto Ball

Check Arrangement

Process Connection

From 15 to 50 mm Flanged / Upto 25 mm Screwed / Socket Welded

others on request.Connection Orientation

Top-Bottom Vertical / Side-Side Right / Side-Side Left / Side-Side Back

(Applicable only for Reflex Level Gauge)Vent / Drain½" Plugged / ½" Needle Valve / ½" Ball Valve,

others on request

Scale

Aluminium / SS engraved in mm

Additional Information:

• Item Code: RLG-009
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet.

Highly driven by technical excellence, we are noted as the foremost manufacturers, exporters and suppliers of Reflex Transparent Level Gauge. This gauge is available in numerous specifications as per the need of our patrons. We ensure our customers that our gauge is quality tested on predefined parameters. Additionally, this gauge is provided at highly competitive price.

Features:

Sturdy design

Exact measurement

Widely used in pharmaceutical industry

Other Details:

The pharmaceutical and petrochemical industry needs the most advanced mechanisms for the success of their operations

This is because they deal with materials that are highly toxic and inflammable, and are used under high pressures and temperatures

The Reflex & Transparent Level Gauge is one mechanism that is extremely suitable for this industry

Reflex & transparent level gauges are preferred due to their ruggedness, sturdiness and low initial costs

They are installed to give easy level reading by viewing the position of liquid through tough glass panes

Reflex and Transparent Level Gauge give an accurate reading of liquid level, colorless liquid can be seen using the principles of light reflection and reflection through the special prism glass. Light striking the area of glass covered by the liquid is allowed to pass to the interior prof the gauge- this area appears black. Light striking the area of glass above the liquid is reflected black silver. The distinct line that separates the black and silver areas shows the actual liquid level in the system.

Specifications:C/C Distance: To Mention

Visible length/ No. of section: To Mention

Service: To Mention

Op. pressure kg/Cm2g/temp. C/ Sp Gr: To Mention

Hydro test Pressure Kg/Cm2g: 1.5 times of Max Pressure

Process Conn. Flange size & rating: To Mention

Process Conn. Flange Material: To Mention

Material of Construction: Toughened Borosilicate Imported Kinger/Maxos/Indian make

Material of Construction: CS/SS 304/SS 316/PP/PTFE

Material of Cover Plate: CS to ASTM A-105 (Non whetted parts)Valve Type/Design: Ball Check / Auto Shut -Off

Valve Body Material: CS/SS 304/SS 316/PP/PTFE

Valve Trim Material: SS 316Vent/Drain connection: ½" NPT (F) with Plug (OR) To Mention

Material of bolts & nuts: SS 316 MS, EN-8, SS or to mention

Gaskets/seals: CAF, AF 120, PTFE

Line are engraved @ each 10 mm

Scale: Aluminum/Acrylic/SS Linear marking

Least count: 1 mm, 5 mm & 10 mm or to Mention

“KABIR” manufactures high performance Magnetic Level Indicator. It is a single chamber design with 2”, 2.5", OR 3" chamber diameter according to the application. There are twelve basic configuration styles, including top mounted models. “KABIR” magnetic level indicators are produced in a wide range of materials of construction, including plastics. . “KABIR” also offers one of the most complete selections of process connection types and sizes in the industry. It may be equipped with a variety of Level Transmitters and Switches, as well as, Flag & Shuttle indicators with or without stainless steel scales. This enables the . “KABIR” to be a complete level and monitoring control. 

A change of level in the process tank corresponds to a similar change within the chamber. In response to the level movement, the float moves accordingly, actuating the Bi – Color Rotating Roller/ Flap OR Red & Black Capsule for visual indication.

            MOC : S.S.316 / S.S.304 / P.P OR FRP

           · Broad range of chamber styles

                · Fabricated non-magnetic chambers

· ANSI and DIN flanges

· Precision manufactured float

· Bi – Color Rotating Roller type indicator

· Red & Black Capsule design type indicator

· Feed water heaters

· Industrial boilers

· Oil water separators

· Flash drums

· Surge tanks

· Gas chillers

· Height up to 6 Meter in single piece design

· Max. Temperature up to 375⁰ C (S.S.) and P.P Max 60^oC,                          

· Max. Pressure up to 130 Kg/Cm² of S.S. and P.P 7 Kg/Cm²

 :-

· Level switches

· Level transmitters with 4-20 mA output, Hart protocol , Digital Indicator in mm  or %

· Acrylic scale standard / SS. Scale optional

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100
• Delivery Time: WEEK
• Packaging Details: EXPORT WORTHY PACKING

Make Float and Board Types Level Gauge are used for fluid level measurement in several industries.

Features:

The Float which is of course the most important element of the instrument.In fact, its structural design, volume displacement, weight, and buoyancy force are all taken into careful consideration when a float is specified for a particular application.This type of Float & Board type Level Gauge basically work on the principle of buoyancy.The float is well connected to the counter weight along with a pointer through flexible wire ropes.The pointer slides along the guide against a graduated scale to indicate corresponding levels inside the tank.Most often, the Float & Board type Level Gauge finds its application in underground and over head storage tanks.They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on.Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on.In short, the Float & Board type Level Indicator is most widely used in all non hazardous and non pressurized tanks.For Tank height more than 10 meter we provide Anchor Plated with Anchor Housing for Installing the Anchor Rope.

Specifications:

The features of a typical Float & Board type Level Gauge can be detailed as follows.Often A typical Float & Board type Level Gauge is consist of a Float, dust proof Pulley Housing, Pointer cradle with nylon and 150 mm width screen printed Aluminum Scale.It has dust proof pulley housing.This instrument is an absolutely reliable and accurate system for liquid level measurement in tall overhead tanks.It comes with an SS bush bearing for a smooth rotation of pulley.The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting.It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking.The indicator of course, has a slack float with large diameter for higher accuracy.“KABIR” also offers Vapor Seal Type Float & Board type Level Gauge which is generally used for tanks having corrosive fumes / vapors OR N­2 [Nitrogen] Purging tanksIn this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. OR PVC pipe & which drives a follower magnetized bi - color capsule inside a glass tube to indicate liquid level.This level indicator is very easy to transport as well as install.

Other details:

Rope : SS 304 / SS 316 / PP / PTFE / SS with PTFE CoatedPulley Housing : Aluminum / P.P.Telescopic Pipe : MS / SS / PVC,Board : Aluminum / FRP / SS 316Flanges : MS / SS / P.P.Pointer : MS / SS / FRP Coated MSAnchor Plate : SS 316Anchor Housing : MS / SS 316Fasteners : GI Plated / SSBracket : MS / SS

• Broad range of chamber styles
• Fabricated non-magnetic chambers
• ANSI and DIN flanges
• Precision manufactured float
• Bi – Color Rotating Roller type indicator
• Red & Black Capsule design type indicator
• Feed water heaters
• Industrial boilers
• Oil water separators
• Flash drums
• Surge tanks
• Gas chillers
• Height up to 6 Meter in single piece design
• Level switches
• Levzl transmitters with 4-20 mA output and Digital Indicator in mm OR Litter.
• Stainless steel scale standard
• Customer scales

Additional Information:

• Item Code: SMLI-capsuel-109
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: within a week
• Packaging Details: Wooden Cages & Bubble sheet

• Over Ground / Overhead storage tanks
• Water, Fire water and DM water, petroleum storage tanks
• All non-hazardous and non-pressurised tank application

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Mumbai
• Production Capacity: 100
• Delivery Time: Ready stock
• Packaging Details: Wooden Cages & Bubble sheet.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100
• Delivery Time: WEEK
• Packaging Details: EXPORT WORTHY PACKING

• Owing to our experience and skills in this sector, we have been successfully engaged in manufacturing & supplying Reflex Level Indicator. These level indicators are tested by our quality analyst to ensure their high strength, sturdiness and rust resistant surface. Our offered range of level indicators find wide application in petrochemical industry, power plants and pharmaceutical industries. Reflex Level Indicator is manufactured in compliance with the set standards & norms of the industry

• Reflex gauges give an accurate reading of liquid levels. Colourless liquids can be seen using the principles of light refraction and refraction through the special prism glass
• Light striking the area of glass covered by the liquid is allowed to pass to the interior of the gauge - this area appears black
• Light striking the area of glass above the liquid is reflected black silver. The distinct line that separates the black and silver areas shows the actual liquid level in the system

• These gauges are connected on the side of vessels, have liquid chamber made of single piece metallic bar stock. clear visibility of the path of the liquid in the chamber is provided by clamping & sealing firmly on the chamber heavy duty toughened glasses.
• Accessories: isolation valve, drain valve, vent valve -steam jacket arrangement
• Option: ibr approved available on request application is widespread in petrochemical, power, fertilizer, and pharmaceutical chemical industries.
• Application: boiler, ammonia receiver, solvent etc

• Transparent gauges give an accurate reading of liquid level, clear glass is mounted on the front and back of the gauge. The permits the observer to see not only the level of the liquid, but also its characteristics such as colour or the interface between two immiscible liquids in the same system